1. Attach Seat (23) to Seat post (24), tighten with
three flat washer (25) and three lock nuts (26).
Insert the seat post (24) with seat (23) into the
main frame (29). Lock it at suitable position with
adjust knob (28).
1. Attach Left Pedal strap to Left Pedal (6L) which
is marked with decal "L". Doing same for Right
Pedal (6R).
2. Then attach Left Pedal (6L) and Right Pedal
(6R) to their appropriate Crank Arm (54). The
right pedal is on the right-hand side of the cycle
as you sit on it.
Note: that the right pedal should be threaded on
clockwise and the left pedal on counter-
clockwise.
To Next Page
Loading...
