Chapter 6 CPU Functions
6- 24
6.14 Password Setting per Program Block
Password Setting per Program Block function sets password for each program block. You should input
password to open program.
(1) How to set program block password
(a) Click 『Properties』 after selecting program in project window.
(b) Click password tap.
(c) Click 『OK』 after inputting new password.
(2) Opening password-set program
(a) When you open password-set program, the following window appears.
(b) After inputting correct password, click 『OK』 to open program.
(3) How to delete program block password
(a) After program in project window, click 『Properties』.
(b) Click password tap.
To Next Page
