(8) Preset function
It changes the current value into preset value.
There are two types of preset function, internal preset and external preset. External preset is fixed
as input contact point.
• Preset setting value is saved at the following special K area.
Type
Area per each channel (Double word)
Ref.
Internal
preset value
K304 K334 K364 K394 K2224 K2254 K2284 K2314 -
K306 K336 K366 K396 K2226 K2256 K2286 K2316 -
• Preset command is specified through the following special K area, external preset is used by
executing the designated input contact point after allowance bit is on.
Type
Area per each channel (Bit)
Ref.
preset
K2601 K2701 K2801 K2901 K21801
K21901
K22001 K22101 -
preset
K2602 K2702 K2802 K2902 K21802
K21902
K22002 K22102 -
preset
P008 P009 P00A P00B P00C P00D P00E P00F -
To Next Page
Loading...