LTH Electronics MXD75 - Range & Sensor Compatibility Tables

Specification
- 6 -
MXD70 Conductivity Setup and
Operating Guide
Specification
Range & Sensor Compatibility Tables
CONDUCTIVITY RANGE NOMINAL CELL CONSTANT
0.010 0.100 1.000 10.00
0 to 9.999 S/cm
 
 
0 to 99.99 S/cm
  

0 to 999.9 S/cm
   
0 to 9.999 mS/cm
   
0 to 99.99 mS/cm
 
Note 1

0 to 999.9 mS/cm
  
Note 1
RESISTIVITY RANGE
NOMINAL CELL CONSTANT
0.010 0.100 1.000 10.00
0 to 99.99 k-cm
   
0 to 999.9 k-cm
 
 
0 to 9.999 M-cm
 
 
0 to 99.99 M-cm

  
TOTAL DISSOLVED SOLIDS
RANGE
NOMINAL CELL CONSTANT
0.010 0.100 1.000 10.00
0 to 9.999 ppm
 
 
0 to 99.99 ppm
  

0 to 999.9 ppm
   
0 to 9999 ppm
   
0 to 99.99 ppt
   
Note 1: Maximum measurement range will be limited by solution temperature. With the temperature
compensation slope set to 2%/°C derate linearly from full scale at 25°C to 50% of scale at 100°C.
Total Dissolved Solids in ppm = S/cm * F, where F = TDS Factor (0.50 - 0.90)