LTS Scale DR2100A - STANDARD FEATURES

LTSscale.com Page 3 of 28 REV F – 2018.04.09
LTS DR2100A/AN Indicator
STANDARD FEATURES
The versatile DR2100 digital indicator offers the following standard features:
 New Smaller Enclosure Size
 Rugged Steel Enclosure
 Water and Dust Resistant
 1.0 Inch LCD Display
 2 Line Alphanumeric Display
 16 Characters/Line
 Back-lit Display
 Universal Mounting Bracket
 12 VDC Operation
 Low Power Indication
 Zero Tracking
 Push Button On/Off
 Auto Shut Off Timer (Optional)
 Motion Detection
 Push-button Zero
 Push-button Tare
 Dummy Zero
 Push-button Weight Accumulation
 Push-button Print
 NET/GROSS Switching
 Keyboard ID Number Entry
 Pounds/Kilograms Switching
 Average Part Weight (APW) Entry
 Piece Count Capabilities
 Function Lockout Capabilities
 Custom Printout Setup Capabilities
 Keyboard Calibration
 Four-Point Linearity Calibration
INDICATOR OPTIONS
The following options are available for the DR2100 indicator:
 Custom Software
 Time & Date
 Remote Push-button Operation
 Multiple Setpoint Controls
 RS232C Output
 Barcode Scanning
 Radio Frequency Operation
 Ticket Printing
 Roll Tape Printing
 Barcode Printer
Standard operating voltage is 12VDC. For trucks having voltages greater than 12
VDC, a DC-DC converter is required.