LTS Scale DR2100A - OPERATION SEQUENCES

LTSscale.com Page 6 of 28 REV F – 2018.04.09
LTS DR2100A/AN Indicator
OPERATION SEQUENCES
Gross Weighing
 Raise empty forks off ground and level
 Press SCALE/ZERO key
 Press STORE/TARE key (clears previous tare value)
 Lower forks and lift load
 Gross weight displayed
Net Weighing - Push-button Tare
 Raise empty forks off ground and level
 Press SCALE/ZERO key
 Press STORE/TARE key (clears previous tare value)
 Lower forks and lift load
 Press STORE/TARE key
 Add additional weight to lift
 Net weight displayed
Net Weighing - Keyboard Tare
 Raise empty forks off ground and level
 Press SCALE/ZERO key
 Press STORE/TARE key (clears previous tare value)
 Lower forks and lift load
 Key in tare value
 Press STORE/TARE key
 Net weight displayed
Piece Counting
 Raise empty forks off ground and level
 Press SCALE/ZERO
 Press STORE/TARE key (clears previous tare value)
 Lower forks and lift load
 Press APW key
 Key in APW value or accept displayed value
 Press APW key
 Press WEIGHT/COUNT key
 Read count on top line and weight on bottom line
Gross Weight Accumulation
 Raise empty forks off ground and level
 Press SCALE/ZERO
 Press STORE/TARE key (clears previous tare value)
 Lower forks and lift load
 Read weight
 Press ACCUM key (weight value added)
 Repeat for additional loads
To view: Press and hold ACCUM key
To Clear: Press 0 key
Press ACCUM key