LTS Scale DR2100A - Page 9

LTSscale.com Page 7 of 28 REV F – 2018.04.09
LTS DR2100A/AN Indicator
Net Weight Accumulation
 Raise empty forks off ground and level
 Press SCALE/ZERO
 Press STORE/TARE key (clears previous tare value)
 Key in tare value
 Press STORE/TARE key
 Lower forks and lift load
 Read weight
 Press ACCUM key (weight value added)
 Repeat for additional loads
To view: Press and hold ACCUM key
To Clear: Press 0 key
Press ACCUM key
Counting Accumulation
 Raise empty forks off ground and level
 Press SCALE/ZERO
 Press STORE/TARE key (clears previous tare value)
 Press APW key
 Key in APW value or accept displayed value
 Press APW key
 Press WEIGHT/COUNT key
 Key in tare value
 Press STORE/TARE key
 Lower forks and lift load
 Read weight
 Press ACCUM key (count value added)
 Repeat for additional loads
To view: View displays weight total only
Total data can be sent to printer
To Clear: Press 0 key. Press ACCUM key
Printing
Press PRINT key at any time to send data to printer.
Program setup determines what will be printed.
See Technical Manual for programming data output.
Note: Unit must have optional RS232 option installed.