LTS LTN8916 - Managing Network HDD

User Manual of Network Video Recorder
150
Figure 12. 5 HDD Status Changes to Normal
Initializing the HDD will erase all data on it.
12.2 Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD. Up to 8 network disks can be
added.
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
Figure 12. 6 HDD Information Interface
2. Click the Add button to enter the Add NetHDD interface, as shown in Figure 12. 7.
Figure 12. 7 HDD Information Interface
3. Add the allocated NetHDD.
4. Select the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
• Add NAS disk:
1) Enter the NetHDD IP address in the text field.
2) Click the Search button to search the available NAS disks.
3) Select the NAS disk from the list shown below.
Or you can just manually enter the directory in the text field of NetHDD Directory.