Installation Instructions
5 | Page
OPERATING THE REMOTE:
ICONS ON THE REMOTE LCD PANEL
Before you start using the remote, take the time to read through this section and get familiar with the button and function
of each button.
Fig. 5
LED Indicator
The red LED indicator on the top of transmitter will flash when the buttons are active.
BUTTONS ON THE REMOTE
HI: Press the button to set fan running at High speed.
MED: Press the button to set fan running at Medium speed.
LOW: Press the button to set fan running at Low speed.
OFF: Press the button to turn OFF the fan.
: Press the button to turn ON/OFF the light.
The remote has memory function. If the fan or light is turned off by the wall switch, it will memorise and recover the last
status when turned on next.
To Next Page
Loading...