Need help?Do you have a question about the LUCCI WHITEHAVEN and is the answer not in the manual?
General safety guidelines and warnings for installation and use.
Australian specific warning regarding all-pole disconnection switch.
Detailed list of all components included with the ceiling fan.
Instructions for securely attaching the fan's mounting bracket to the ceiling.
Guidance for installing the fan on angled ceilings up to 15 degrees.
Step-by-step process for attaching the fan blades to the motor.
Procedure for safely hanging the fan and connecting electrical components.
Steps to complete the fan installation, including canopy attachment.
Guide on operating the ceiling fan using the remote control.
Instructions for battery installation and function of the remote control.
Instructions for cleaning and maintaining the ceiling fan.
Safety guidelines for handling and replacing remote control batteries.
Details on fan models, ratings, weight, and dimensions.
Information on Lucci ceiling fan warranty policy and coverage.
Contact details for warranty claims and form for service.
The Lucci Whitehaven DC Ceiling Fan is an energy-efficient and quiet ceiling fan designed for indoor, alfresco, and coastal areas, provided it is fully undercover with a minimum of one wall. It is not waterproof, and exposure to water, wind, or dust will void the warranty. This fan utilizes a DC motor, which offers significant energy savings, consuming up to 65% less energy than traditional AC motor ceiling fans. The DC motor technology also ensures silent operation by stabilizing the current, effectively reducing motor noise. Additionally, the DC power management keeps the motor operating at a low temperature (less than 50°C), which contributes to a longer motor lifespan compared to standard AC fans.
The fan comes with a 6-speed remote control, offering a wider range of comfort levels compared to the typical 3-speed controls found on AC ceiling fans. For models equipped with a light, the LED globe features a 3-step dimmable function, controlled by pressing the light ON/OFF button within 3 seconds to cycle through 100%, 50%, and 15% brightness levels. The remote control also includes a memory function, which means the fan or light will turn on to its last setting if it was turned off by an isolating switch for more than 7 seconds.
Installation of the Lucci Whitehaven DC Ceiling Fan requires careful attention to safety precautions. It must be assembled and installed by a licensed electrician. A crucial safety requirement, particularly in Australia, is the incorporation of an all-pole disconnection switch into the fixed wiring, in accordance with local wiring rules (AS/NZS 60335-1, clause 7.12.2). Failure to include this disconnection means will void the warranty. If multiple DC ceiling fans are installed in one location, a single-pole switch is required for each fan to facilitate remote and receiver pairing. The fan must be mounted to a structure capable of supporting at least 30kg, with the blades positioned at least 2.1 meters above the floor in Australia and 300mm from any objects or walls. The hanging system supports angled ceiling installations up to a maximum of 15 degrees.
The installation process involves several steps: unpacking and verifying all parts, installing the mounting bracket to the ceiling joist using appropriate screws (wooden structures only; other screw types must be used for different surfaces), and then attaching the fan assembly. The ball joint and dowel pin are removed, followed by the canopy and motor housing, to allow for blade installation. The three blades are secured to the motor using blade screws, ensuring even tightening to prevent warping or unbalancing. After blades are installed, the motor housing and canopy are reinstalled, and the ball joint and dowel pin are secured. For fans with lights, the globe is then installed.
Electrical wiring must be performed by a licensed electrician. The motor's earth wire connects to a single earthing terminal block. Mains supply wires (live, neutral, and earth) connect to the terminal block on the mounting bracket. The fan assembly is then hung on the mounting bracket, ensuring the hanger ball's key slot aligns with the key pin to prevent rotation. The DC motor driver/receiver is wired to the supply from the mounting bracket and to the fan motor's input wires via quick connectors. If the fan includes a light, the light output wire from the DC motor driver connects to the light kit's input wire. The receiver is carefully inserted above the hanger ball in the mounting bracket, taking care not to damage wiring.
Finishing the installation involves ensuring earth wiring continuity, sliding the canopy up to the mounting bracket, aligning keyholes with screws, and securing it by tightening the screws. The canopy cover is then attached.
The remote control requires 2 x AAA batteries, inserted with correct polarity. The remote and receiver are factory-paired, so re-pairing is generally not needed after installation. However, if control is lost (e.g., fan only runs at high speed, no reverse function, or remote cannot communicate), re-pairing is necessary. This involves switching off the main power to the fan, then switching it back on, and within 30 seconds, pressing and holding the On/Off button on the remote for 5 seconds until a 'beep' sound from the receiver confirms successful pairing. The remote transmitter holder can be installed on a wall using provided screws.
Maintenance for the Lucci Whitehaven DC Ceiling Fan is minimal. Periodic cleaning every 6 months using a soft brush or lint-free cloth is recommended to avoid scratching the paint finish. The fan should never be soaked or immersed in water or other liquids, as this can damage the motor or blades and pose an electrical shock risk. Organic solvents or cleaners should not be used on the fan. The motor has permanently lubricated ball bearings, so no oiling is required.
The fan may exhibit some wobbling during operation, which is normal due to its mounting on a rubber grommet to prevent excessive vibration. Minor movement is acceptable. If unusual wobbling occurs, the fan should be stopped immediately, and the manufacturer or service agent contacted. A balancing kit is provided for initial installation to address wobbling and can be used again if the fan becomes unbalanced. Slight motor noises, especially at night, are also normal, particularly during a 24-hour "breaking-in" period, and are not considered a product fault covered under warranty.
Battery safety precautions are important: keep new and used batteries away from children, do not ingest batteries, and ensure correct polarity. Batteries should be removed if the product is not used for long periods and disposed of safely. If a battery is suspected to have been swallowed or inserted into any part of the body, immediate medical attention should be sought by calling the Poisons Information Centre. Leaked battery chemicals should be handled with caution and not placed near eyes or ingested.
General| Model | WHITEHAVEN |
|---|---|
| Brand | LUCCI |
| Type | Ceiling Fan |
| Remote Control | Yes |
| Reversible | Yes |
| Color | White |
| Light Included | No |
| Blade Span | 52 inches |
| Motor Type | AC |
| Material | Metal |
| Warranty | 2 Year |
| Motor Speed | 3 Speed |
To Next Page
