LuCell LU-3000 - Power Connection and Battery Management; Connecting the DC 12 V Adapter

4
│
LuCell (LU-3000)
Notice
- This safe uses DC 12V adapter as main power supply.
(Specification or adapter design is subject to change without prior notice).
Incorrect adapter may cause problems to system.
(Not covered by company warranty).
1. Check back of safe for adapter insert location.
2. Connect DC12V adapter jack to power plug.
3. Connect adapter power cord to outlet.
Connection is confirmed when screen starts self-test, plays sounds, and
displays “good.”
2.
Connecting Adapter
<Back>