LuCell LU-3000 - Advanced Functions; Password Security Mode; Keypad Lock Mode; Voice Setup

12
│
LuCell (LU-3000)
1. Password Security Mode
Press START button twice to hide password.
2. Keypad Lock Mode
1) Press START button for more than 3 seconds until “Act” appears. “Act”
message signifies activation of keypad lock mode. Any keypad input will only
display “Act.”
2) To deactivate keypad lock mode, press START button for more than 3
seconds until “dEAct” appears.
3. Voice Set up
1). Open door and press password change button for 2 seconds.
LCD will display“Set.”
2). Press password change button 2 times again for a short time.
- “Vol” will be displayed on LCD.
3) Enter a number between 1 and 4. Press START button.
※ Notice
Keypad Lock Mode will remain despite removal of batteries.
8.
Convenient Functions