Lucent Technologies 6400 Series User Manual

13
continued on next page
Speakerphone (continued)
To use the Group Listen feature in which the handset and the
speakerphone are active at the same time
1. While you are active on the handset, press
.
Red light next to goes on.
People in your office can hear the conversation on the speakerphone,
but you must use the handset in order to speak to the other party.
Note: If you hang up the handset within 10 seconds after pressing
, the call remains active on the speaker.
If you hang up the handset more than 10 seconds after pressing
, the speaker will also turn off, and the call is disconnected.
To end a call
1. Press again.
Red light next to goes off.
Test
The Test feature allows you to test the lights and display on your telephone.
To test the lights and display on your telephone
1. While on-hook, press and hold down .
Lights go on in columns, and if there is a display on the telephone,
all the display segments fill in.
2. To end test, release .
Lights return to normal operation.
Note: If the lights or the display segments do not respond during the test,
see your system manager.
Transfer
The Transfer feature allows you to transfer a call from your telephone to
another extension or outside number.
To send the present call to another extension or outside number
1. While on a call, press . [dial tone]
Present call is put on hold, and the green light next to the held call
blinks.
You are given a new call appearance.
Spkr
Spkr
Spkr
Spkr
Spkr
Spkr
Trnsfr
Trnsfr
Trnsfr

Lucent Technologies 6400 Series Specifications

General

Brand	Lucent Technologies
Model	6400 Series
Category	Telephone
Language	English