Lucent Technologies 6400 Series User Manual

9
Call-Handling Features
continued on next page
Conference
The Conference feature allows you to conference up to six parties
(including yourself) on a call.
To add another party to a call (for a total of six parties)
1. Press . [dial tone]
Present call is put on hold; you are given a new call appearance.
2. Dial the number of the new party and wait for an answer.
3. When you want to add the new person, press again.
4. Repeat Steps 1 through 3 for additional conference connections.
To add a call you have put on hold to another call you are connected
to
1. Press . [dial tone]
Held call light and the current call appearance light flutter.
2. Press the call appearance button of the call on hold (first call).
3. Press again.
All parties are now connected.
To drop the last person added to the conference call
1. If your telephone has a display, press the Menu button and then
press the softkey below Drop.
If you do not have the Drop feature on your display, press
(if administered).
Hold
The Hold feature puts a call on hold until you can return to it.
To keep a call on hold while you answer another call or perform
another task
1. Press .
Green light next to the held call blinks.
To answer a new call while active on another
1. Press .
Green light next to the held call blinks.
2. Press the call appearance button of the incoming call.
You are connected to the incoming call.
Conf
Conf
Conf
Conf
Drop
Hold
Hold

Lucent Technologies 6400 Series Specifications

General

Brand	Lucent Technologies
Model	6400 Series
Category	Telephone
Language	English