10
continued on next page
Hold
(continued)
To return to the held call
1. Press the call appearance button of the held call.
Redial
The Redial (or Last Number Dialed) feature automatically redials the last
extension or outside number you dialed.
To redial the last number that you dialed
1. Press .
The last number you dialed is automatically redialed.
Note: The redialed number can be an outside number (up to 24 digits), an
extension, or a trunk or feature access code.
Speaker (Listen-Only) and Group Listen
The Speaker feature allows you to place calls or access other features
without lifting the handset. However, in order to speak to the other party,
you must use the handset. With the Group Listen feature, the handset and
speaker are active at the same time.
Note: The 6408 and 6408D are equipped with a one-way, listen-only
speaker. The 6408 Plus, 6408D Plus, 6416D Plus, and 6424D Plus
can be optioned for either a two-way
speakerphone
or a one-way,
listen-only
speaker
. Check with your system manager to see which
feature you can use on your telephone.
To place a call without lifting the handset or for any listening-only
feature (such as monitoring a call on which you have been put on
hold or for group listening)
1. Press .
Red lights next to and go on.
2. Place a call or access the selected feature.
3. Adjust speaker volume if necessary:
To raise the volume, press the right half of the Speaker Volume
control button labeled ; to lower the volume, press the left half
of the Speaker Volume control button labeled .
Redial
Spkr
Spkr Mute
To Next Page
Loading...
Need help?
General
