14
Getting Messages
Selecting a Personalized Ring
Transfer
(continued)
2. Dial the number to which the call is to be transferred. [ringback tone]
3. Remain on the line and announce the call; if the line is busy or if there
is no answer, return to the held call by pressing its call appearance
button.
4. Press again.
Call is sent to the dialed extension or number.
5. Hang up.
Message
Your Message light goes on when a caller has left a message for you.
For directions on retrieving your messages, see your system manager.
Note: If your telephone has a display, you may also be able to use the
Message Retrieval display feature.
Select Ring
The Select Ring feature allows you to choose your own personalized
ringing pattern for your telephone from among eight different patterns.
To select a personalized ringing pattern
1. While on-hook, press .
Current ringing pattern plays and repeats every three seconds.
2. Continue to press (and then release) to cycle through all
eight ringing patterns.
3. If you want to save the ringing pattern currently being played, do not
press anymore. You will hear the selected ringing pattern
two more times, and then it will be automatically saved.
You hear confirmation tone (two rising tones), and your new
ringing pattern is set.
Note: If you go off-hook, receive a call, or lose power during selection, the
process is interrupted and you must start again.
Trnsfr
Conf
Conf
Conf
To Next Page
Loading...
