26
Send All Calls
(continued)
To cancel Send All Calls
1. If you are using a telephone with a display, press the Menu button
and then press the softkey below SAC again (while on-hook).
If your telephone does
not
have a display or if SAC is not available on
your display, press the button again (while on-hook)
OR, Dial the Send All Calls cancel code __________ (while off-
hook). [confirmation tone]
Whisper Page
The Whisper Page feature allows you, if you have appropriate permissions,
to make an announcement to a person at another extension currently on
another call. Only the person at the other extension hears the
announcement; the other person on the call cannot hear the message.
Note: The M10L-8400 is the only headset adapter that should be plugged
into the Handset jack on the 6400 Series telephones. If other
headset adapters are used, the Whisper Page announcement may
be overheard by the other person on the call.
To make an important announcement (such as an incoming call) to
someone at another extension busy on another call
1. Press the button
OR, Dial the Whisper Page access code __________.
Both people on the other call hear a beep.
The person whom you have called can press the
button which forms a two-party speaking path with your telephone.
The other call is put on hold and that person cannot hear your
conversation.
2. Speak with the person you have called.
Note: Any person in the system with the
button
administered on the telephone can block Whisper Page calls
by pressing the
button.
Send Calls
Whisper Page
Whisper Answer
Whisper Answer
Whisper Off
To Next Page
Loading...
Need help?
General
