Lucent Technologies DACS II - Page 41

DACS II/Rel 8.2.6 April 2000
2-25
DACS II/Rel 8.2.6
MML
RTRV,STATE,EQPT,NPC,LPBK
53131
[ /* d="-" - NPC not equipped */]
[ /* d=0 - NPC not specified in the input command */]
/* t=A - loopback with AIS and fpa is off */
[ /* t=B - loopback with AIS and fpa is on */]
[ /* t=C - transparent loopback without AIS and fpa is off */]
/* t=T - transparent loopback without AIS and fpa is on */
/* t=N - NPC not in loopback state */
/* t="-" - NPC not equipped */
/* t=0 - NPC not specified in the input command */
"t[g]"
;
Denial Message Nonhierarchical
[O.53131.01]
<xy> yy-mm-dd hh:mm:ss LINK-n[vv]
M RTRV STATE EQPT::NPC-[s]abc[&&-[t]def]:[ww]:LPBK DENY
mmmm
/* [O.53131.01] */
/* <explanation of error condition code> */
;
Hierarchical
[O.53131.01]
<xy> yy-mm-dd hh:mm:ss LINK-n[vv]
M RTRV STATE EQPT::NPC-uv-m-np[&&&-wx-k-qr]:[ww]:LPBK DENY
mmmm
/* [O.53131.01] */
/* <explanation of error condition code> */
;
Explanation of
Parameters
LPBK
Loopback
NPC
Network processing circuit
If an NPC range is specified in the input command, the following
floating window rules apply:
1.
Unequipped NPCs within the requested range will
be skipped.
2.
If the first NPC in the range is a DA or TA type NPC,
only those NPC types will be reported on.