2-26
DACS II/Rel 8.2.6 April 2000
DACS II/Rel 8.2.6
MML
RTRV,STATE,EQPT,NPC,LPBK
53131
3.
If the first NPC in the range is a TE or TH type NPC
on a Hybrid DS3U, then only those type of NPCs
will be reported on.
4.
If the first NPC in the range is a PA, PB, or PC type
NPC, then only those NPC types will be reported
on.
nnn
Total Number of NPCs in the module that are in the loopback
state
COND
Condition
[s]abc
The 3- or 4-digit nonhierarchical NPC number, start of NPC
range
[t]def
The 3- or 4-digit nonhierarchical NPC number, end of NPC
range
[u]ghi
Lowest numbered NPC in the FTM that contains NPC [s]abc
[v]mno
Lowest numbered NPC in the FTM that contains NPC [t]def
[u]jkl
Highest numbered NPC in the FTM that contains NPC [s]abc
[v]pqr
Highest numbered NPC in the FTM that contains NPC [t]def
FTM is an acronym for Facility Terminating Module.
For FTMs in FTUs or IFTUs, each row contains 10 values of
output.
For FTMs within DS3Us each row contains 7 values.
For FTMs within HDS3Us each row contains 4 values.
To Next Page
Loading...