6.3 Depth low Limit ---
Press the POWER - MENU key until DEPTH LOW LIMIT
appears. AUTO is the default setting. When in AUTO
setting, the lower depth will be adjusted by the unit to
follow the operation. If the depth low limit is setted as 20
then you only see the underwater information below 20
meters from the water surface. (Auto, 1-100)
Press the POWER - MENU key until DEPTH UPPER
LIMIT appears. OFF is the default setting. When in OFF
setting, the depth upper limit function will not work
If you set the depth upper limit as 9 and depth upper
limit as 20 then you will see the underwater information
between 9 and 20 meters from the water surface.
(Auto, 1-100)
NOTE: In manual operation, if the depth is greater than
the depth limit settings, the bottom will not be visible on
the display. Select AUTO to return to automatic operation.
may not show many sonar returns that could be fish.
Sensitivity levels from 1 to 9 (1 –9).
-7-
DE TH LOW LIMIT P
AUTO
1 0 0
AUTO
DE TH UPPER LIMIT P
OFF
1 0 0
OFF
6.4 Depth upper Limit ---
To Next Page
Loading...
