Model 2200 Scaler Ratemeter
Ludlum Measurements, Inc. Page 8 March 2016
The “crossed-out wheelie bin” symbol notifies the consumer that the product
is not to be mixed with unsorted municipal waste when discarding; each material
must be separated. See section 8, “Recycling” for further information. Also
displayed on the side panel.
The “CE” mark is used to identify this instrument as being acceptable for use
within the European Union.
Replacement of Fuses
Warning!
For continued protection against risk of fire, replace only with fuses of
the specified type and current rating!
Return for Repair or Calibration
To return an instrument for repair or calibration, provide sufficient packing
material to prevent damage during shipment.
Every returned instrument must be accompanied by an Instrument Return
Form, which can be downloaded from the Ludlum website at
www.ludlums.com. Find the form by clicking the “Support” tab and selecting
“Repair and Calibration” from the drop-down menu. Then choose the
appropriate Repair and Calibration division where you will find a link to the
form.
To Next Page
Loading...
