Model 2200 Scaler Ratemeter
Ludlum Measurements, Inc. Page 17 March 2016
Recycling
Ludlum Measurements, Inc. supports the recycling of the electronics
products it produces for the purpose of protecting the environment and to
comply with all regional, national, and international agencies that promote
economically and environmentally sustainable recycling systems. To this
end, Ludlum Measurements, Inc. strives to supply the consumer of its
goods with information regarding reuse and recycling of the many different
types of materials used in its products. With many different agencies –
public and private – involved in this pursuit, it becomes evident that a
myriad of methods can be used in the process of recycling. Therefore,
Ludlum Measurements, Inc. does not suggest one particular method over
another, but simply desires to inform its consumers of the range of
recyclable materials present in its products, so that the user will have
flexibility in following all local and federal laws.
The following types of recyclable materials are present in Ludlum
Measurements, Inc. electronics products, and should be recycled separately.
The list is not all-inclusive. Nor does it suggest that all materials are present
in each piece of equipment:
Batteries
Glass
Aluminum and Stainless Steel
Circuit Boards
Plastics
Liquid Crystal Display (LCD)
Ludlum Measurements, Inc. products, which have been placed on the market
after August 13, 2005, have been labeled with a symbol recognized
internationally as the “crossed-out wheelie bin.” This notifies the consumer that
the product is not to be mixed with unsorted municipal waste when discarding;
each material must be separated. The symbol will be placed near the AC
receptacle, except for portable equipment where it will be placed on the
battery lid.
Sectio
To Next Page
Loading...
