Model 14C Survey Meter
Ludlum Measurements, Inc. Page 19 July 2022
9. Recycling
udlum Measurements, Inc. supports the recycling of the electronic products it produces for
the purpose of protecting the environment and to comply with all regional, national, and
international agencies that promote economically and environmentally sustainable recycling
systems. To this end, Ludlum Measurements, Inc. strives to supply the consumer of its goods with
information regarding reuse and recycling of the many different types of materials used in its
products. With many different agencies – public and private – involved in this pursuit, it becomes
evident that a myriad of methods can be used in the process of recycling. Therefore, Ludlum
Measurements, Inc. does not suggest one particular method over another, but simply desires to
inform its consumers of the range of recyclable materials present in its products, so that the user will
have flexibility in following all local and federal laws.
The following types of recyclable materials are present in Ludlum Measurements, Inc. electronics
products, and should be recycled separately. The list is not all-inclusive, nor does it suggest that all
materials are present in each piece of equipment:
Batteries
Glass
Aluminum and Stainless Steel
Circuit Boards
Plastics
Liquid Crystal Display (LCD)
Ludlum Measurements, Inc. products, which have been placed on the market after August 13, 2005,
have been labeled with a symbol recognized internationally as the “crossed-out wheelie bin.” This
notifies the consumer that the product is not to be mixed with unsorted municipal waste when
discarding. Each material must be separated. The symbol will be placed near the AC receptacle,
except for portable equipment where it will be placed on the battery lid.
The symbol appears as such:
To Next Page
Need help?
General
