Lufft XA1000 User Manual

GB Operating manual – multifunction measuring meter XA1000 / XP200 / XP400 • 08_2015 10
Setting the language
1. Press the "Main menu" key (6) to open the main
menu.
2. Press the "Settings" key in the main menu.
3. Press the language selection key (31) in the
"Settings" screen.
4. Press the key with the desired language from the
following screen.
– The selected screen language is activated
immediately.
5. Press the "Back" key (2) to return to the desired
measuring mode. Alternatively press the "Main
menu" key and then the "Measuring mode" key.
Main menu
You can open the following menus from the main
menu:
6
31
Measuring mode: Perform measurements in compliance with the
connected sensor. If no sensor is connected,
only the values from the integrated air pressure
sensor are available.
Archive: Open archived measured values.
Settings: Make any device settings.
2

Lufft XA1000 Specifications

General

Brand	Lufft
Model	XA1000
Category	Measuring Instruments
Language	English