Need help?Do you have a question about the LulzBot Mini and is the answer not in the manual?
General| Tweezers | Yes |
|---|---|
| Certification | CE, FCC, WEEE |
| Product color | Black, Green |
| Viewing window | No |
| Maximum print platform temperature | 120 °C |
| Package weight | 11330 g |
| AC input voltage | 100/240 V |
| Power consumption (typical) | 150 W |
| Print technology | - |
| Printing material | ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA) |
| Layer thickness (max) | 0.5 mm |
| Layer thickness (min) | 0.05 mm |
| Maximum build size (WxDxH) | 152 x 152 x 158 mm |
| Filament thickness supported | 3 mm |
| Maximum vertical build speed | 275 mm/sec |
| Printing compartment volume | 3.65 L |
Weight and Dimensions| Depth | 435 mm |
|---|---|
| Width | 340 mm |
| Height | 385 mm |
| Weight | 8550 g |
To Next Page
