LulzBot Mini Quick Start Guide

5
Prepare the Model for Your First Print
5A A 3D model named rocktopus will automatically load onto Cura’s virtual print bed the first time
you run the software. The rocktopus is the first object you will 3D print on your LulzBot Mini.
5B Locate the included 1 meter (40 inch) green or yellow coil of HIPS sample filament. We
strongly recommend using the included HIPS sample filament for your first rocktopus print.
STEP
STEP 5 Continued...
If the rocktopus model is not present on the virtual print bed, you can download it from
LulzBot.com/rocktopus or from the included USB thumb drive, then load it using the Load Model button
in the main Cura interface.
i
Filament is the name for the materials your LulzBot Mini uses to 3D print objects. The included filament
is a plastic named High Impact Polystyrene, or HIPS.
i

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g