EasyManua.ls Logo

Lumary SMART Wi-Fi User Manual

Lumary SMART Wi-Fi
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Lumary
SMART Wi-Fi
DIMMER SWITCH
START GUIDE
Question and Answer IconNeed help?

Do you have a question about the Lumary SMART Wi-Fi and is the answer not in the manual?

Lumary SMART Wi-Fi Specifications

General IconGeneral
BrandLumary
ColorWhite
ConnectivityWi-Fi
Voice ControlAmazon Alexa, Google Assistant
App ControlLumary App
FeaturesRemote Control, Timer, Schedule

Summary

What's in the Box

Get Ready for Installation

Download the Lumary App

Register a Lumary Account

Enter Contact Information

Enter your mobile phone number or email address for account registration.

Verify and Set Password

Enter the verification code and create a password for your account.

Log into the Lumary App

Install the Smart Wi-Fi Dimmer Switch

Turn Off Power

Safely shut off power at the circuit breaker before installation.

Check for Neutral Wire

Ensure the existing switch box has a neutral wire.

Connect Switch Wiring

Wire Connections

Connect the switch's neutral, load, and live wires to the home's electrical system.

Complete Switch Installation

Mount and Finish

Secure the switch and attach the faceplate.

Restore Power

Restore power to the switch by reversing the initial shutdown step.

Indicator Light Status

Understand the indicator light behavior after power restoration.

Reset and Restart Device

Power Reset Function

Press Reset to cycle the circuit if the switch is not working.

Wi-Fi Reset Function

Press and hold Restart for Wi-Fi pairing mode.

Reset Modes Explained

Easy Mode Reset

Reset once to reach Easy Mode with rapid blue blinking.

AP Mode Reset

Reset twice to reach AP Mode with slow blue blinking.

Connect via Easy Mode

Start Easy Mode Setup

Open the Lumary app and initiate device addition for Easy Mode.

Verify Device Status

Ensure the device indicator light is flashing rapidly for Easy Mode.

Connect via AP Mode

Verify AP Mode Status

Confirm the device indicator light is flashing slowly for AP Mode.

Select AP Mode in App

Choose "AP Mode" within the Lumary app for connection.

Enter Wi-Fi Details

Input your Wi-Fi network name and password.

Frequently Asked Questions

Device Sharing and Grouping

Explains sharing device access and grouping multiple Lumary devices.

Device Control Limits and Renaming

Information on device control limits and how to rename devices or groups.

Troubleshooting Offline Devices

Steps to resolve issues when a device is offline or unreachable.

Additional FAQ and Indicator Guide

Wireless Range and Internet Dependency

Discusses wireless range factors and internet dependency for Lumary products.

Indicator Light Meanings

Clarifies the meaning of green and blue indicator lights on the device.

Troubleshooting and Requirements

Wi-Fi Connection Issues

Steps to resolve problems connecting to Wi-Fi.

Device Reset Procedure

Instructions for resetting the device to reconnect to Wi-Fi.

System Requirements

Lists the necessary hardware and software for the Lumary system.

Technical Specifications

Provides key technical data and specifications for the device.

Compliance and Support

FCC Compliance Information

Details the device's compliance with FCC regulations.

Important Installation Precautions

Presents crucial safety and installation precautions.

Customer Support Contact

Provides contact information for customer support and product inquiries.