Need help?Do you have a question about the LumaSense Impac IGA 5 and is the answer not in the manual?
General| Optical Resolution | 150:1 |
|---|---|
| Power Supply | 24 V DC |
| Storage Temperature | -20 to 70 °C |
| Protection Class | IP65 |
| Temperature Range | 250 to 2500 °C |
| Accuracy | ±(0.3 % of reading + 1 °C) |
| Repeatability | ±(0.1 % of reading + 1 °C) |
| Output | 0/4 to 20 mA, RS232, RS485 |
| Interface | RS232 / RS485 |
| Operating Temperature | 0 to 50°C |
| Spectral Range | 1.45 to 1.8 µm |
| Emissivity Adjustment | 0.100 to 1.000 (adjustable via keys or software) |
| Sighting | Through-lens sighting or laser sighting (switchable) |
Details safety precautions regarding the laser targeting light, its class, and warnings.
Outlines safety regulations for mains voltage connection and qualified personnel.
Details the pinout of the pyrometer's connector for various functions.
Explains how to connect the pyrometer to a PC via RS232 or RS485 interfaces.
Provides tables showing spot sizes for different distances and optics.
Provides an overview of the DIP switch functions for various settings.
Explains the function of the online/offline switch for parameter settings.
Details how to set the analog output signal (0-20mA or 4-20mA) via DIP switch.
Explains how to adjust the exposure time using DIP switches for measurement stability.
Explains emissivity and methods for determining and setting it for accurate readings.
Lists typical emissivity values for various materials across different spectral ranges.
Explains how to manage maximum value storage settings and clear intervals.
Explains how to connect pyrometers to a PC for software operation.
Details how to display and modify pyrometer parameters within the software.
Explains the function, activation, and parameter setting of the integrated PID controller.
Details the PID controller's self-tuning algorithm for automatic parameter determination.
Details safety precautions to be taken before performing maintenance on the pyrometer.
Lists commands for controlling the integrated PID controller via interface.
To Next Page
