Need help?Do you have a question about the LumaSense IS 12 and is the answer not in the manual?
General| Resolution | 0.1°C |
|---|---|
| Optical Resolution | 50:1 |
| Power Supply | 24 V DC |
| Accuracy | ±1% of reading or ±1°C, whichever is greater |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20 to 60°C |
| Emissivity Adjustment | 0.10 to 1.00 |
| Output | 4 to 20 mA |
| Spectral Range | 8 to 14 µm |
Provides guidance on using the manual, including legend and terminology.
Covers essential safety information for installation, operation, and laser/electrical hazards.
Details procedures for unpacking, service, shipment, transport, and disposal of the instrument.
Describes the IMPAC pyrometers, their applications, and key features.
Details technical data, dimensions, parameters, accuracy, optics, and control interface.
Covers power supply, main connector pinout, and limit contact connections.
Details connecting the pyrometer to a PC via RS232/RS485 and other interfaces.
Explains aiming methods and details available fixed and focusable optics.
Explains how to navigate and change settings using the pyrometer's control panel keys.
Details how to set various pyrometer parameters like temperature display and laser targeting.
Lists factory defaults and describes the built-in scanner's functionality and adjustments.
Details emissivity adjustment, exposure time, and maximum/minimum value storage settings.
Explains analog output, limit contacts, temperature display units, and interface settings.
Covers digital interface, address assignment, baud rate settings, and test current output.
Introduces the InfraWin software for parameter adjustment, data logging, and analysis.
Guides users through installing and starting the InfraWin software.
Instructions for cleaning the pyrometer's front window safely and effectively.
Procedures for replacing fixed and focusable optics.
Guides on resolving low, high, or fluctuating temperature readings.
Addresses general measurement errors, contamination, interference, and laser targeting light failures.
Details the ASCII format, transmission parameters, and basic commands for data exchange.
Provides a list of commands for reading and setting pyrometer parameters.
Lists specific part numbers for different IMPAC pyrometer models and configurations.
Lists part numbers for available accessories such as cables, power supplies, and mounting hardware.
To Next Page
