Need help?Do you have a question about the LumaSense IMPAC IS 310 and is the answer not in the manual?
General| Power Supply | 24 V DC |
|---|---|
| Resolution | 0.1 °C |
| Accuracy | ±0.3% of reading + 1 °C |
| Response Time | adjustable up to 10 s |
| Emissivity | 0.100 to 1.000 |
| Output Signal | 0/4 to 20 mA |
| Analog Output | 0/4 to 20 mA linear |
| Digital Interface | RS485 |
| Interface | RS485 |
| Sighting | Laser targeting |
| Weight | 500 g |
Information about the manual's purpose and usability.
Explains symbols, notes, and technical terms used in the manual.
Important information on safely installing and operating the pyrometer.
Safety regulations for connecting the pyrometer to mains voltage.
Information regarding liability, warranty terms, and software usage.
Instructions for inspecting and unpacking the pyrometer upon delivery.
Procedure for requesting service, repairs, or technical support.
Instructions for shipping instruments to LumaSense for repair.
Guidelines for transporting, packing, and storing the pyrometer.
Procedures for the proper disposal of inoperable pyrometers.
Describes the intended use of the IS 310 and IGA 310 pyrometers.
Lists the items included with the instrument upon purchase.
Provides detailed technical specifications for the pyrometers.
Presents the physical dimensions of the pyrometer with a diagram.
Overview of optional accessories available for the pyrometers.
Instructions for the proper electrical connection of the pyrometer.
Details the pin configuration of the pyrometer's male connector.
Examples of wiring for connecting external devices like displays.
Formulas for calculating temperature based on the current output signal.
Information about the pyrometer's LED targeting light and its usage.
Details the different optics available and their effect on spot size.
Explains emissivity and its importance for accurate temperature measurement.
Provides typical emissivity values for various materials.
Safety precautions to take before performing maintenance on the pyrometer.
Instructions for cleaning and maintaining the pyrometer lens.
Identifies causes and solutions for low temperature readings.
Identifies causes and solutions for high temperature readings.
Addresses common measuring errors and their solutions.
Lists part numbers for the IS 310 and IGA 310 pyrometers by optics/range.
Lists part numbers for various accessories compatible with the pyrometers.
To Next Page
