12
Change network settings
5.2.2 Using Lumens VMS Software to View the Images
The VC-BC701P DHCP initial setting is ON. If VC-BC701P is connected to the local area network
(LAN), the camera IP can be retrieved via the following methods
Install Lumens VMS software (Please download from the Lumens official website,
http://www.mylumens.com/support)
Open LUMENS VMS software
Search for the camera: Press
[automatically search for the device] button to locate the
VC-BC701P camera
Click VC-BC701P in the list and start operation after connecting to network
<Note> When using automatic search, the camera and computer must be in the same
network segment, e.g.: 192.168.4.X
To Next Page
Loading...
