Lumiscope 1092 User Manual

8
Description of Display Marks
Pulse could not be
measured.
Repeat the measure-
ment without moving
the arm.
DISPLAY MARK CONDITION/CAUSE
CORRECTIVE ACTION
Pulse could not be
measured accurately.
The cuff was inflated to
more than 280 mmHg.
Pressurization is not pos-
sible. The wrist cuff was
not wrapped properly.
Exhaust the air from
the cuff.
The arm moved during
measurement.
Batteries are weak.
There is a problem with
the device.
There is a problem with
the unit.
After rewrapping the
cuff, repeat measure-
ment.
After rewrapping the cuff,
conduct the measurement
without moving.
Repeat the measure-
ment without moving
the arm.
Replace the batteries.
Return to Lumiscope
service Department.
Return to Lumiscope
Service Department.

Lumiscope 1092 Specifications

General

Brand	Lumiscope
Model	1092
Category	Blood Pressure Monitor
Language	English