To Next PageTo Next PageHow to fix Lumiscope 1143 when there is no display?
If your Lumiscope Blood Pressure Monitor displays no reading when you press the ‘O/I’ button, try these steps: * Replace both batteries with new ones. * Ensure the batteries are installed in the correct position. * Clean the battery terminals with a dry cloth.
Why Lumiscope 1143 reading is too high or low?
If your Lumiscope Blood Pressure Monitor gives an extremely low or high reading, ensure your posture is correct, wrap the wrist cuff correctly, relax, and keep quiet and silent during the measurement.
What to do if Lumiscope Blood Pressure Monitor pulse rate is too high or too low?
If your Lumiscope Blood Pressure Monitor's pulse rate is too low or too high, keep quiet and silent during the measurement. If the issue persists, take another measurement after resting for at least 5 minutes.
Why do the batteries wear out so quickly on my Lumiscope 1143 Blood Pressure Monitor?
If the batteries in your Lumiscope Blood Pressure Monitor wear out too quickly, it may be due to faulty batteries. Use alkaline batteries from known manufacturers.
General| Type | Automatic |
|---|---|
| Date imprinting | Yes |
| Number of users | 1 user(s) |
| Memory registers | 90 |
| Placement supported | Wrist |
| Battery type | AAA |
| Number of batteries supported | 2 |
| Display type | LCD |
Details the sequence of actions and display readings during a blood pressure measurement.
Explains the device's automatic inflation levels and adjustments.
Describes how to stop measurement and deflate the cuff quickly.
