Lumiscope 1143 User Manual

12
5 SETTING THE DATE AND TIME
The device has a 12-hour time format. The icon ‘AM’ indicates the time of Ante
Meridiem and the icon ‘PM’ indicates the time of Post Meridiem. To get accurate
date and time, the user should preset the date and time correctly before the first
use of this device.
The operation procedure for presetting Date/Time is as follows:
1. When the device has batteries installed, the display will show as in Fig. 1;
Fig.1
2. Press and hold button ‘M’, then press button ‘O/I’, and the year number will
flash;
Fig.2

Lumiscope 1143 Specifications

General

Type	Automatic
Date imprinting	Yes
Number of users	1 user(s)
Memory registers	90
Placement supported	Wrist
Battery type	AAA
Number of batteries supported	2
Display type	LCD