Lumiscope 1143 - MEMORY FUNCTION

16
7 MEMORY FUNCTION
MEMORY RECALL
1. Model 1143 can store 90 sets of readings and will automatically calculate the
average of the last 3 readings. When memory is full (90 sets of readings are
stored), the oldest reading will be replaced by the newest. Memory will not clear
even if the batteries are removed;
2. After a measurement is finished, or when the device is in standby mode, the
user can press button ‘M’ to recall memory. Press button ‘M’ to display the
average value of the last 3 readings as in Fig. 8;
Fig.8