Lust CDA32.003 - KEYPAD Parameter Setting

CDA3000 Operation Manual
4-19
4 Commissioning
1
2
3
4
5
A
DE
EN
FR
IT
ES
FR
Example parameter setting
(PARA menu)
• The parameters in the PARA menu are grouped into subject areas
according to their functions, in order to provide a clearer overview.
• Only the parameters to which the current user level permits access
can be changed.
1. Select PARA menu.
2. Select desired subject area with
cursor keys and confirm with
Start/Enter.
3. Select desired parameter
with cursor keys
(user level 1-MODE = 2).
4. The current value is displayed,
with the last character flashing.
Switch to the next character
using the down key. Use the up
key to change the flashing char-
acter. The fifth character at the
extreme left indicates the
preceding sign: (–) = minus.
The last character can be
entered as an exponent.
Save new value with Start/Enter
or cancel (without saving) with
Stop/Return.
PARA
PARA
PARA
PARA
start
enter
start
enter
start
enter
stop
return
stop
return
stop
return
start
enter
PARA
0...9