4-8
CDA3000 Operation Manual
4 Commissioning
Note: If the power output of the connected motor differs greatly from
the rating of the inverter module, the motor characteristic and
motor monitoring must be adapted. The same applies to spe-
cial motors, multi-pole motors, etc. Refer to the Application
Manual.
Input signals
Figure 4.3 Example of a driving profile for two directions of rotation
(ASTER=ROT_1)
Output signals
Figure 4.4 Output signal as a function of driving profile
(ASTER=ROT_1)
H11 Standstill; H12 Speed reached
t [ms]
0
0
1
10 V
FMAX
5 V
R1
0 V
f [Hz]
STL
0
1
STR
FMAX
303-FMAX1
592-DECR1
590-ACCR1
594-STPR1
t [ms]
0
H11
H12
FMAX
f [Hz]
FMAX
To Next Page
Loading...
