6-21
86-KG Scaling factor for 10-G
The factor determines the value of the display parameter 10-G according
to the formula:
87-DISP Permanent display [Decimal]
Determines the parameter for the permanent display.
All parameters from the menu „VAL“ are possible.
88-PSW1 Pass word 1 [Decimal]
Determines the pass word for the parameterization menu <PARA>
89-PSW2 Pass word 2 [Decimal]
Determines the pass word for control via KEYPAD <CTRL>menu
91-TYPE Inverter type [Decimal]
Issues the type of the identifed end level. All min-max values and factory
settings of the voltage and current dimensions, which must be entered
absolutely, depending for example from:
VF1207M - 44-VN1 = 230 V factory setting
VF1406M - 44-VN1 = 400 V factory setting
92-REV Software revision [Decimal]
States the installed software version (see 2nd cover page).
(10 G) (12_F) (86_KG)
_
=∗
To Next Page
Loading...