Need help?Do you have a question about the Lust CDD3000-HF and is the answer not in the manual?
Important safety precautions for handling the drive.
Guidelines on the proper application and use of the drive.
Outlines the responsibilities of the user and manufacturer.
Essential operational notes and precautions for installation.
Details different mounting methods and cooling variants.
Step-by-step guide for mounting the drive on a wall.
Instructions for mounting the drive using a cold plate.
Procedures for installing the drive with a push-through heat sink.
General overview of the installation process and terminal layout.
Proper methods for connecting grounding leads for safety.
Instructions for connecting the motor phases and sensors.
Detailed steps for connecting motor phase wires.
How to connect and configure motor temperature sensors.
Guidelines for connecting and using a holding brake.
Information on connecting encoder cables for third-party motors.
Procedures for connecting the main power supply.
Details on connecting and using braking resistors.
How to wire and connect control signals.
Detailed specifications for analog and digital I/O connections.
Default terminal assignments for common functions.
Explains the isolation between analog and digital signals.
Guidelines for ensuring electromagnetic compatibility.
How to set up encoder simulation or master encoder input.
Details on generating encoder-compatible pulses.
Information on using master encoders for loop control.
Overview of different commissioning modes.
How to commission multiple identical drives.
Steps for serial commissioning using DRIVEMANAGER software.
Steps for serial commissioning using the KEYPAD.
Guide for the first-time setup and configuration of the drive.
How to choose units (Hz or rpm) for speed display.
Choosing and configuring drive functions from presets.
Configuring motor and encoder parameters for optimal performance.
Adjusting fundamental drive parameters for specific applications.
Configuring advanced functions like torque and speed limits.
Setting up safety-related parameters and motor protection.
Configuration of motor filters for harmonic reduction.
Selecting the output stage switching frequency.
How to save drive configuration to device or file.
Performing a test run to verify drive functionality.
Key functions and operations using DRIVEMANAGER software.
Using the KEYPAD for drive operation and configuration.
Explanation of status LED indicators and their meanings.
How the drive responds to different fault conditions.
Interpreting error codes and messages for troubleshooting.
Procedures for resetting errors after fault correction.
Common errors related to KEYPAD operation and their remedies.
Troubleshooting errors encountered with SMARTCARD usage.
Diagnosing issues related to power switching.
How to reset parameters or the entire system to factory defaults.
Detailed specifications and performance data of the drive.
Environmental operating and storage conditions.
Guidance for planning installations involving cold plates.
How line chokes affect system load and performance.
Requirements and guidelines for UL certification.
Diagrams showing the physical layout and connections of the drive.
To Next Page
General