Lust CDD3000-HF - Safety; Measures for your safety

CDD3000-HF Operation Manual
1-1
DE
EN
FR
IT
FR
1
2
3
4
5
A
1Safety
1.1 Measures for
your safety
The CDD3000-HF servo drives are quick and safe to handle. For your
own safety and for the safe functioning of your device, please be sure to
observe the following points:
Read the Operation Manual first!
• Follow the safety instructions!
Electric drives are dangerous:
• Electrical voltages > 230 V/460 V:
Dangerously high voltages may still be present
10 minutes after the power is cut. You should therefore
always check that no power is being applied!
• Rotating parts
• Hot surfaces
Your qualification:
• In order to prevent personal injury and damage to
property, only personnel with electrical engineering
qualifications may work on the device.
• The qualified personnel must familiarize themselves with
the Operation Manual (refer to IEC364, DIN VDE0100).
• Knowledge of national accident prevention regulations
(e.g. VBG 4 in Germany)
During installation observe the following instructions:
• Always comply with the connection conditions and
technical specifications.
• Comply with the standards for electrical installations,
such as regarding wire cross-section, grounding lead and
ground connections.
• Do not touch electronic components and contacts
(electrostatic discharge may destroy components).