Need help?Do you have a question about the Lust SMARTDRIVE VF1000 M Series and is the answer not in the manual?
Critical safety precautions for handling and operating the frequency inverter.
Defines the intended applications and installation requirements for inverters.
Describes product design features and available accessories.
Official declaration of conformity to relevant directives and standards.
Details the CE acceptance test and compliance with European norms.
Guidelines for ensuring proper electromagnetic compatibility during installation.
Diagram and details for physical assembly and component layout.
Comprehensive table of technical specifications for inverter models.
Dimensional drawings of the inverter for installation planning.
Information on proper installation methods and site requirements.
Wiring diagram illustrating connections for power, control, and communication.
Instructions for EMC compliance and fault handling.
Details on connecting the inverter to the mains power supply.
How to connect the motor to the inverter.
Explanation of the braking chopper function and its design.
How to connect and use motor temperature monitoring inputs.
Specifications for various control signal inputs and outputs.
Explains how to configure and use the analog frequency reference input.
Describes start, stop, and direction control using STR/STL inputs.
How to select fixed frequencies using digital inputs.
Details the Manual/Automatic Operation (MOP) function.
Configuration and function of relay and digital signal outputs.
Details for connecting via the LUSTBUS protocol.
Information on connecting via the INTERBUS-S protocol.
Details for connecting via the CAN-Bus protocol.
Explanation of the display elements and LED status indicators.
Lists warning messages and their causes without fault reaction.
Details error codes, conditions, and remedies for inverter faults.
Description of the thermal overload protection mechanism.
Diagram identifying the components and controls of the KEYPAD.
General information on the keypad's menu structure and operation.
Explains the different menu navigation paths.
Describes the function of each key on the keypad.
Details the elements and information shown on the LCD display.
Illustrates the hierarchical structure of the keypad menus.
Explains how to use the MOP function via the keypad.
Lists and explains parameters for basic operation and commissioning.
Lists and explains parameters for advanced functions and configurations.
Parameters that vary based on inverter model or region.
Explains how the operating mode parameter affects control options.
Describes the selection of frequency reference sources and types.
Parameters for setting fixed frequencies and frequency limits.
Parameters for configuring acceleration and deceleration ramps.
Parameters related to voltage-frequency characteristics and voltage boost.
Details advanced features like I*R compensation and slip compensation.
Configuration options for digital and analog signal outputs.
To Next Page
General