2-7
Connection
Reference output
UR
Supply output UV
Frequency
reference input
FSIN (analog)
Frequency
reference input
FSIN (digital)
Digital control
inputs
STR, STL, S1IND,
S2IND, S3IND
Digital frequency
output SOUTF
Analog output
SOUTA
Relay outputs
S1OUT, S2OUT
Specification
10 V ± 2.5%
short circuit proof
Load capacity max. 10 mA
24 V ± 10%
short circuit proof
Load capacity max. 100 mA
0...10 V, R
i
= 100 kΩ
4...20 mA, R
i
= 500 Ω
Resolution 10 BIT
Deviation ± 2.5% from final value
Software filter up to123 ms
LOW < 5 V, HIGH > 5 V (max. 30 V)
Pulse width 10 ms min.
Deviation ± 0.8 %
LOW < 7 V, High > 14 V (max. 30 V)
Current intake (at 24 V) = 10 mA max.
SPS compatible, +24 V-logic against ground
Hardware filter 3.3 ms
Not short circuit proof, switching current = 12 mA
LOW-Impulse, LOW-Level approx. 1 V
Pulse-Pause Ratio 1 : 1
6-fold output frequency
with stand still HIGH = 24 V (int. pull-up resist.)
Not short circuit proof
Output voltage 10 V
Load capacity (up to 10 V) = 8 mA
Resolution 10 BIT
Switching voltage 250VAC
Switching current 1 A max.
Switching delay 10 ms max.
2.4 Control connections
2.4.1 Specification
To Next Page
Loading...