A-2
stop
return
start
enter
wait 2 minutes
after mains off
A Useful information on the Operation Manual
The details in this manual apply for all frequency inverters belonging to
the SMARTDRIVE VF1000M family of devices. The housing design is
designated with the letter M for “Medium”.
The Operation Manual consists altogether of 6 chapters, which are listed
under the title “Directly to your goal”.
General information about device versions, safety instructions as well as
CE acceptance test is given.
Chapters 1, 2 and 3 are important for commissioning. Chapters 4, 5 and
6 relate to the operation of the inverter with the control unit K
EYPAD KP100
and give information on the individual parameters.
According to the customer-specific requirements on the frequency
inverter, there are also device versions with special functions. The
specifications which deviate from those of the standard device are
marked in the appropriate descriptions.
The following pictograms for warning and instruction occur in the Opera-
tion Manual to improve clarity.
⇒ Caution! Danger of death by electrocution.
⇒ Caution! It is essential that you follow these instructions.
⇒ Caution! Disconnect device from mains and wait 2 minutes to allow
the DC link capacitors to discharge.
⇒ Prohibited! Incorrect operation may cause damage to equipment.
⇒ Useful information, tip.
⇒ Setting with the KEYPAD is alterable.
To Next Page
Loading...