Lust CDD3000-HF - Selecting preset solution

CDD3000-HF Operation Manual
4-9
4 Commissioning
DE
EN
FR
IT
ES
FR
1
2
3
4
5
A
4.3.2 Selecting preset
solution
Preset solutions
The preset solution is selected according to the type of drive task. A
preset solution is a presetting of the CDD3000-HF which can
subsequently be adapted to the application.
The CDD3000-HF provides a wide range of preset solutions, each
described briefly in the D
RIVEMANAGER. The application preset by a
preset solution can optionally be controlled via the control terminals or
over a field bus.
The preset solutions are:
• Torque control, ±10V reference (TCT_1)
• Speed control with external position control (SCT_1)
• Speed control, ±10V reference (SCT_2, SCB_2)
• Speed control, fixed speeds (SCT_3, SCB_3)
• Speed control, pulse input (SCT_4, SCB_4)
• Speed control, reference and control over fieldbus (SCB_5)
• Electronic gearing (PCT_1, PCB_1)
• Positioning over fieldbus (PCB_2)
• Positioning, fixed positions (PCT_3, PCB_3)
• Positioning, fully programmable (PCT_4, PCB_4)
With the DRIVEMANAGER the desired preset solution can be selected and
modified.
Figure 4.3 Initial commissioning