Application Note #480
4 www.lutron.com
Occupied Level: The light level your sensor will turn on to when motion is detected is adjustable. There are three
available settings for the light level.
• 100%: The lights will always turn on to 100% of the dimmable light level.
• 50%: The lights will always turn on to 50% of the dimmable light level.
• Preset: The lights will always turn on to the last light level selected. If you have locked your preset light level in
Advanced Programming Mode, the lights will come on to your locked preset level instead of the last level selected.
What do I want?
• To fully utilize the dimming capabilities, Preset mode allows for full customization of your preferred light level.
• 100% will ensure that the lights are turned on to the brightest available level upon entering a room. If you want the
most light possible upon entering a room, this is the best choice.
• If you would like the default level to match the default level of other Maestro® products in your house, 50% is the
default Maestro® light level for manual operation of Maestro® products.