Power Current Normal operation ( w/o SD card save
data and LCD Backlight is OFF) :
Approx. DC 14 mA.
When SD card save the data and LCD
Backlight is OFF) :
Approx. DC 37 mA.
*
If LCD backlight on, the power
consumption will increase approx.
12 mA.
Weight Meter 489 g/1.08 LB.
Probe 335 g/0.74 LB
Dimension Meter 177 x 68 x 45 mm
(7.0 x 2.7x 1.9 inch)
Probe 190 mm x 28 mm Dia.
( 7.5" x 1.1" Dia. )
Accessories * Oxygen probe ( OXPB-11 )............1 PC.
Included * Hard carrying case ( CA-06 ).........1 PC.
* Operation manual.........................1 PC.
* Spare Probe head with Diaphragm
OXHD-04.....................................
2 set
* Probe-filling Electrolyte
OXEL-03......................................
1 set
Optional *Oxygen probe.................... OXPB-11
probe and *Spare Probe head with
accessories Diaphragm set...................
OXHD-04
*Probe-filling Electrolyte.......OXEL-03
*RS232 cable.......................UPCB-02
*USB cable..........................USB-01
*Data Acquisition software
..................................SW-U801-WIN
*AC to DC 9V adapter
@ Above specification tests under the environment RF Field Strength
less than 3 V/M & frequency less than 30 MHz only.
4
To Next Page
Loading...
Need help?
General
