Lutron Electronics DO-5512SD - 4. DO (Dissolved Oxygen) MEASURING and CALIBRATION PROCEDURE; 4-1 Dissolved Oxygen measurement

4. DO ( Dissolved Oxygen )
MEASURING and CALIBRATION
PROCEDURE
4-1 Dissolved Oxygen measurement
Fig. 2
1)Prepare the Oxygen Probe ( standard probe, DOPB-11 ),
install the " Probe Plug " ( 4-1, Fig. 2 ) into the
" DO Socket " ( 3-13, Fig. 1 ).
2)Power on the meter by pressing " Power Button "
( 3-2, Fig. 1 ) once.
7