4-8 Auto power off management
1)The instrument has built-in "Auto Power Shut-off "
function in order to prolong battery life. The meter will
switch off automatically if none of the buttons are
pressed within 10 min..
2)To de-activate this feature, Select the memory record
function during measurement, by pressing the
" REC Button " ( 3-5, Fig. 1 ).
5. BATTERY REPLACEMENT
*Replace the batteries when the left corner of the LCD
displays the low battery icon " ", using 4 fresh
1.5 V ( UM4, AAA ) batteries.
*To change the batteries, open ( rotate clockwise direction )
the " Battery Cover " ( 3-7, Fig. 1 ).
*Make sure the " Battery cover " (3-7, Fig 1) is secured
after changing the batteries.
6. OPTIONAL CARRYING CASE
Soft carrying case with sash.
Size : 210 x 80 x 50 mm
Model : CA-52A
11
0612-PHB318
To Previous Page
Loading...