Lutron Electronics VB-8206SD - Advanced Measurement Features; Max Hold, Zero Button, and Datalogger Settings

Max Hold Acceleration, Velocity :
Measurement To measure and update the max. peak
value.
Displacement :
To measure and update the max.
peak to peak ( p-p ) value.
Zero Button Under Acceleration ( RMS ) measurement,
sensor motionless , press Logger Button
( 3-6, Fig. 1 ) > 5 seconds.
Max. Hold Reset Under Max. hold measurement, press
Button Logger Button ( 3-6, Fig. 1 ) > 5 seconds.
Datalogger Auto 1 second to 3600 seconds
Sampling Time
@ Sampling time can set to 1 second,
Setting range but memory data may loss.
Manual Push the data logger button
once will save data one time.
@ Set the sampling time to
0 second.
@ Manual mode, can also select the
1 to 99 position ( Location ) no.
Memory Card SD memory card 1 GB to 16 GB.
Advanced * Set clock time ( Year/Month/Date,
setting Hour/Minute/ Second )
* Decimal point of SD card setting
* Auto power OFF management
* Set beep Sound ON/OFF
* Set sampling time
* SD memory card Format
Data error no. 0.1 % no. of total saved data typically.≦
Data Hold Freeze the display reading.
* Only available for the RMS function.
Memory Recall Maximum & Minimum value.
* Only available for the RMS function.
3