Auto data logger
If the data sampling time already set to
1, 2, 10, 30, 60, 600, 1800 or 3600 second,
then the meter can be executed the auto data logger
function. The procedures that to set the data logger
sampling time, please refer page 14.
1.Press the " REC Button " ( 3-4, Fig. 1 ) once to
start the Data Record function and there will be a
" REC " symbol on the display.
2.Press the " LOGGER Button " ( 3-6, Fig. 1 ) once to start
the Auto Data Logger function. The upper display will
show the sampling time in seconds ( For example, 1, 2,
10, 30, 60, 600, 1800, 3600 ) once a while then revert
to the normal display screen. In the same the " REC "
indicator will be flash per the sampling time, in the
same time, the beeper will sound a while.
Now the data Logger function is executed and the
measuring data will save into the memory per
the sampling time.
3.During the Data Logger function is executed, press the
" LOGGER Button " ( 3-6, Fig. 1 ) once will stop to
execute the data logger function, then the " REC "
indicator will stop to flash.
Pressing the " REC Button " ( 3-4, Fig. 1 ) at least
two seconds, then the " REC " indicator will be
disaapeared.
13
To Next Page
Loading...
Need help?
General
